期刊信息
  • 主管单位:
  • 上海市科学技术协会
  • 主办单位:
  • 上海有色金属学会
    上海理工大学
  • 名誉主编:
  • 陈兴章
  • 主    编:
  • 刘平
  • 地    址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • (86)021-55781550
  • 电子邮件:
  • nmme@usst.edu.cn
  • 国际标准刊号:
  • 2096-2983
  • 国内统一刊号:
  • 31-2125/TF
  • 单    价:
  • 8.00
  • 定    价:
  • 60.00
高秋志,杨越,孙林林,马庆爽,余黎明,张竟文,李会军.Co-Ni-Al-Ti基高温合金的蠕变组织与性能研究[J].有色金属材料与工程,2024,45(5):1-9,32.
Co-Ni-Al-Ti基高温合金的蠕变组织与性能研究
Study on creep microstructure and properties of Co-Ni-Al-Ti based superalloys
  
DOI:10.13258/j.cnki.nmme.20240810001
中文关键词:  钴基高温合金  蠕变  微观组织  γ′相粗化  晶界
英文关键词:Co-based superalloys  creep  microstructure  coarsening of γ′ phase  grain boundary
基金项目:国家自然科学基金资助项目(52171107;52201203);驻冀高校与石家庄市产学研合作项目(241791237A)
作者单位E-mail
高秋志 东北大学秦皇岛分校 资源与材料学院, 秦皇岛 066004
东北大学 材料科学与工程学院, 沈阳 110819 
gaoqiuzhi@neuq.edu.cn 
杨越 东北大学秦皇岛分校 资源与材料学院, 秦皇岛 066004
东北大学 材料科学与工程学院, 沈阳 110819 
 
孙林林 东北大学秦皇岛分校 资源与材料学院, 秦皇岛 066004
东北大学 材料科学与工程学院, 沈阳 110819 
 
马庆爽 东北大学秦皇岛分校 资源与材料学院, 秦皇岛 066004
东北大学 材料科学与工程学院, 沈阳 110819 
 
余黎明 天津大学 材料科学与工程学院, 天津 300354  
张竟文 天津大学 材料科学与工程学院, 天津 300354  
李会军 伍伦贡大学 工程与信息科学学部, 澳大利亚 伍伦贡 NSW 2522  
摘要点击次数: 1914
全文下载次数: 1080
中文摘要:
      对新型钴基高温合金进行成分调控,使用Ni、Ti、Cr、Mo等元素替代W以降低合金密度。对不同时效温度和蠕变温度下的2Cr合金和2Mo合金的蠕变性能进行了研究。使用JMatPro软件计算了两种合金的平衡相图,利用扫描电子显微镜(scanning electron microscope,SEM)、X射线衍射仪(X-ray diffractometer,XRD)、透射电子显微镜(transmission electron microscope,TEM)等实验设备对两种合金蠕变断裂前后的微观组织和断口进行观察。实验结果表明,经过时效处理的2Cr合金的蠕变性能优于未时效处理样品的。2Cr合金和2Mo合金在蠕变温度为700 ℃时表现出相对较长的蠕变寿命,在750 ℃时蠕变寿命急剧下降。由于2Cr合金的抗氧化性更强,使得2Cr合金相较于2Mo合金蠕变寿命的降低幅度更小。蠕变断裂以后,2Cr合金中的γ′相粗化程度更严重,2Mo合金中的γ′相更稳定。
英文摘要:
      Control the composition of the novel Co-based superalloy by using elements such as Ni, Ti, Cr, Mo instead of W to reduce the alloy density. The creep properties of 2Cr and 2Mo alloys at different aging temperatures and creep temperatures were studied. The equilibrium phase diagrams of two alloys were calculated using JMatPro software, and the microstructure and fracture surface of two alloys before and after creep fracture were observed using experimental methods such as scanning electron microscope(SEM), X-ray diffractometer(XRD), transmission electron microscope(TEM). The experimental results show that the creep properties of 2Cr treated with aging is better than that of the untreated sample. 2Cr and 2Mo alloys exhibit relatively long creep life at a creep temperature of 700 °C, and the creep life sharply decreases at 750 °C. Due to the stronger oxidation resistance of 2Cr alloy, the decrease in creep life of 2Cr alloy is smaller compared to 2Mo alloy. After creep fracture, the degree of coarsening of the γ′ phase in 2Cr alloy is more severe, while the γ′ phase in 2Mo alloy is more stable.
HTML   查看全文  查看/发表评论  下载PDF阅读器