期刊信息
  • 主管单位:
  • 上海市科学技术协会
  • 主办单位:
  • 上海有色金属学会
    上海理工大学
  • 名誉主编:
  • 陈兴章
  • 主    编:
  • 刘平
  • 地    址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • (86)021-55781550
  • 电子邮件:
  • nmme@usst.edu.cn
  • 国际标准刊号:
  • 2096-2983
  • 国内统一刊号:
  • 31-2125/TF
  • 单    价:
  • 8.00
  • 定    价:
  • 60.00
程启和,王丰,张宇,郭友敏.改性PVDF-HFP基凝胶电解质的合成及锂金属电池性能研究[J].有色金属材料与工程,2024,45(1):1-9.
改性PVDF-HFP基凝胶电解质的合成及锂金属电池性能研究
Synthesis of modified PVDF-HFP-based gel electrolyte and study on the performance of lithium-metal batteries
  
DOI:10.13258/j.cnki.nmme.20240112001
中文关键词:  锂金属电池  凝胶聚合物电解质  金属有机框架材料  PVDF-HFP
英文关键词:lithium metal battery  gel polymer electrolyte  metal-organic framework material  PVDF-HFP
基金项目:安徽省自然科学基金资助项目(2008085ME134)
作者单位E-mail
程启和 安徽大学 材料科学与工程学院, 合肥 230601  
王丰 合肥国轩高科动力能源有限公司, 合肥 230041  
张宇 安徽大学 材料科学与工程学院, 合肥 230601  
郭友敏 安徽大学 材料科学与工程学院, 合肥 230601 youminguo@ahu.edu.cn 
摘要点击次数: 4391
全文下载次数: 2051
中文摘要:
      开发高质量的固态电解质,对制造新一代安全稳定的固态锂金属电池具有重要意义。以聚偏氟乙烯–六氟丙烯(polyvinylidene fluoride-hexafluoropropylene, PVDF-HFP)为聚合物基体,引入MOF-808作为活性填料,采用溶液浇筑法制备了新型凝胶聚合物电解质。优化后的凝胶聚合物电解质在室温下的离子电导率高达3.21 mS/cm,电化学稳定窗口可达5.0 V、具有较高的Li迁移数(0.63)、与锂金属具有良好的界面相容性。组装的磷酸铁锂全电池在0.5 C倍率下循环250次,容量保持率为86.7%。高性能凝胶聚合物电解质对提升锂金属电池的循环稳定性与安全性具有重要的应用价值。
英文摘要:
      Developing high-quality solid-state electrolytes is of great significance for manufacturing a new generation of safe and stable solid-state lithium metal batteries. A novel gel polymer electrolyte was prepared by a solution casting method using polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) as the polymer matrix and incorporating MOF-808 as the active filler. The optimized gel polymer electrolyte showed an ionic conductivity up to 3.21 mS/cm at room temperature, an electrochemical stability window of 5.0 V, a high Li+ migration number (0.63), and good interfacial compatibility with lithium metal. The assembled lithium iron phosphate full battery has a capacity retention rate of 86.7% after 250 cycles under a rate of 0.5 C. High-performance gel polymer electrolyte has important application value for improving the cycle stability and safety of lithium metal batteries.
HTML   查看全文  查看/发表评论  下载PDF阅读器