期刊信息
  • 主管单位:
  • 上海市科学技术协会
  • 主办单位:
  • 上海有色金属学会
    上海理工大学
  • 名誉主编:
  • 陈兴章
  • 主    编:
  • 刘平
  • 地    址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • (86)021-55781550
  • 电子邮件:
  • nmme@usst.edu.cn
  • 国际标准刊号:
  • 2096-2983
  • 国内统一刊号:
  • 31-2125/TF
  • 单    价:
  • 8.00
  • 定    价:
  • 60.00
李坤,郑嘉懿,杨庆超,詹科.316L不锈钢应力腐蚀研究进展[J].有色金属材料与工程,2023,44(5):36-46.
316L不锈钢应力腐蚀研究进展
Research progress on stress corrosion of 316L stainless steel
  
DOI:10.13258/j.cnki.nmme.2023.05.006
中文关键词:  316L不锈钢  应力腐蚀  裂纹萌生  阳极溶解  氢致开裂
英文关键词:316L stainless steel  stress corrosion  crack initiation  anode dissolution  hydrogen cracking
基金项目:国家自然科学基金资助项目(51605293)
作者单位E-mail
李坤 上海理工大学 材料与化学学院, 上海 200093  
郑嘉懿 上海理工大学 材料与化学学院, 上海 200093  
杨庆超 上海理工大学 材料与化学学院, 上海 200093  
詹科 上海理工大学 材料与化学学院, 上海 200093 zhanke@usst.edu.cn 
摘要点击次数: 2673
全文下载次数: 1344
中文摘要:
      316L不锈钢具备良好的力学性能、焊接性能、耐蚀性能,被广泛应用于化工管道、船舶及核电等领域。因其应用环境复杂,316L不锈钢在特定介质环境和拉应力的协同作用下,易发生应力腐蚀开裂,导致严重事故。概述了316L不锈钢应力腐蚀裂纹萌生及扩展的规律,总结了其应力腐蚀的阳极溶解和氢致开裂两种微观主导机制的特点。在此基础上,针对介质环境、材料、表面应力状态3个影响因素,综述了近年来通过调节介质环境的pH、溶液浓度、引入压应力、优化微观结构及涂层工艺等方面,改善316L不锈钢应力腐蚀性能的研究进展。最后,基于316L不锈钢面临的应力腐蚀问题,从应力腐蚀机制和防护措施两方面展望了316L不锈钢应力腐蚀的研究热点和方向。
英文摘要:
      316L stainless steel has good mechanical properties, welding performance, and corrosion resistance, and is widely used in chemical pipelines, ships, nuclear power, and other fields. Due to the complex application environment, 316L stainless steel is prone to stress corrosion cracking under the synergistic effect of specific media environment and tensile stresses, leading to serious accidents. The laws of the stress corrosion crack initiation and propagation in 316L stainless steel were overviewed, the characteristics of the two micro dominant mechanisms of stress corrosion, anodic dissolution and hydrogen induced cracking, were summarized. On this basis, arming at the three influencing factors of medium environment, material, and surface stress state, the recent research progress in improving the stress corrosion performance of 316L stainless steel by adjusting the pH, solution concentration, introducing compressive stress, optimizing microstructure, and coating process of the medium environment is reviewed. Finally, based on the stress corrosion problem faced by 316L stainless steel, the research hotspots and directions of stress corrosion in 316L stainless steel are prospected from the two aspects of stress corrosion mechanism and protective measures.
HTML   查看全文  查看/发表评论  下载PDF阅读器