期刊信息
  • 主管单位:
  • 上海市科学技术协会
  • 主办单位:
  • 上海有色金属学会
    上海理工大学
  • 名誉主编:
  • 陈兴章
  • 主    编:
  • 刘平
  • 地    址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • (86)021-55781550
  • 电子邮件:
  • nmme@usst.edu.cn
  • 国际标准刊号:
  • 2096-2983
  • 国内统一刊号:
  • 31-2125/TF
  • 单    价:
  • 8.00
  • 定    价:
  • 60.00
黄蔚泓,袁文铮,吴宇星,刘淳熙,满达,魏振雄,祖国胤.SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能[J].有色金属材料与工程,2024,45(1):59-65.
SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能
Interface structure and mechanical properties of SUS441 stainless steel/Al intermetallic compound micro-laminated composite plate
  
DOI:10.13258/j.cnki.nmme.20230130001
中文关键词:  SUS441不锈钢/Al  微叠层复合板  热轧复合  合金化  界面
英文关键词:SUS441 stainless steel/Al  micro-laminated composite plate  hot roll bonding  alloying  interface
基金项目:国家级大学生创新创业训练计划资助项目(221158);国家自然科学基金自助项目(51874087;52011530020)
作者单位E-mail
黄蔚泓 东北大学 材料科学与工程学院, 辽宁 沈阳 110819  
袁文铮 东北大学 材料科学与工程学院, 辽宁 沈阳 110819  
吴宇星 东北大学 材料科学与工程学院, 辽宁 沈阳 110819  
刘淳熙 东北大学 材料科学与工程学院, 辽宁 沈阳 110819  
满达 东北大学 材料科学与工程学院, 辽宁 沈阳 110819  
魏振雄 东北大学 材料科学与工程学院, 辽宁 沈阳 110819  
祖国胤 东北大学 材料科学与工程学院, 辽宁 沈阳 110819 zugy@smm.neu.edu.cn 
摘要点击次数: 1816
全文下载次数: 879
中文摘要:
      采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、维氏硬度、拉伸性能的影响。结果表明:复合板界面结合良好;热处理后,固–液反应界面氧化严重,易导致界面分层而开裂;固–固、固–半固、固–液热处理后,金属间化合物层由均匀层和两相层组成,均匀层的物相组成为Fe2A15,两相层的物相组成为Fe4Al13和Al13Cr2,且两相层具有韧性特征,固–半固反应所得到的复合板的综合力学性能最佳。
英文摘要:
      SUS441 stainless steel/Al intermetallic compound micro-laminated composite plate were prepared by the process of surface pretreatment, alternating lamination, hot roll bonding, and heat treatment. The effects of heat treatment temperature on interfacial morphology, microstructure, phase composition, Vickers hardness, and tensile properties of the composite plates were investigated by optical microscope, X-ray diffractometer, scanning electron microscope, and other detection and characterization methods. The results show that the interfacial bonding state of composite plate is good. After the heat treatment, the solid-liquid reaction interface is oxidized seriously, which easily leads to the interfacial delamination and cracking. After solid-solid, solid-semi-solid and solid-liquid heat treatments, the intermetallic compound layer consists of a homogeneous layer and a two-phase layer. The phase in the homogeneous layer is Fe2A15, and the two-phase layer consists of Fe4Al13 and Al13Cr2 phases. The two-phase layer has toughness characteristics, and the composite plate obtained by solid-semi-solid reaction show the best comprehensive mechanical properties.
HTML   查看全文  查看/发表评论  下载PDF阅读器