期刊信息
  • 主管单位:
  • 上海市科学技术协会
  • 主办单位:
  • 上海有色金属学会
    上海理工大学
  • 名誉主编:
  • 陈兴章
  • 主    编:
  • 刘平
  • 地    址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • (86)021-55781550
  • 电子邮件:
  • nmme@usst.edu.cn
  • 国际标准刊号:
  • 2096-2983
  • 国内统一刊号:
  • 31-2125/TF
  • 单    价:
  • 8.00
  • 定    价:
  • 60.00
彭振波,杨晶晶,陈鉴清,张柯,刘平,金明江.热处理工艺对CuAlMn形状记忆合金力学性能影响的研究[J].有色金属材料与工程,2021,42(5):15-22.
热处理工艺对CuAlMn形状记忆合金力学性能影响的研究
Study on the Effect of Heat Treatment Process on Mechanical Properties of CuAlMn Shape Memory Alloys
  
DOI:10.13258/j.cnki.nmme.2021.05.003
中文关键词:  CuAlMn形状记忆合金  普通热处理  循环热处理  抗拉强度  超弹性
英文关键词:CuAlMn shape memory alloy  normal heat treatment  cyclic heat treatment  tensile strength  super-elasticity
基金项目:国家重点研发计划资助项目(2017YFB0306405)
作者单位E-mail
彭振波 上海理工大学 材料科学与工程学院,上海 200093  
杨晶晶 上海理工大学 材料科学与工程学院,上海 200093  
陈鉴清 华东理工大学 理学院 ,上海 200237  
张柯 上海理工大学 材料科学与工程学院,上海 200093 zhangke@usst.edu.cn 
刘平 上海理工大学 材料科学与工程学院,上海 200093  
金明江 上海交通大学 材料科学与工 程学院,上海 200093  
摘要点击次数: 1937
全文下载次数: 2013
中文摘要:
      对采用真空中频感应炉熔炼出的CuAlMn形状记忆合金进行热锻、热轧和伴随中间退火的多道次冷拔加工后,制得直径为2 mm的线材。用普通热处理和循环热处理两种工艺对线材分别进行热处理,并对线材的组织和抗拉强度、超弹性、硬度进行了测试。结果表明:普通热处理时,随淬火温度的升高,晶粒尺寸由213 μm增加至547 μm,抗拉强度、维氏硬度分别由771 MPa、264降低至618 MPa、246,但会略微提高材料的超弹性,最大超弹性应变为2.5%;循环热处理时,随循环次数的增加,晶粒会发生异常长大,对应线材的抗拉强度和维氏硬度分别由348 MPa、240降低至302 MPa、226,超弹性应变由4%增加至10%,循环5次后,加载至10%应变后卸载,变形能完全恢复,表现出极佳的超弹性。
英文摘要:
      The CuAlMn shape memory alloy melted by vacuum medium frequency induction furnace was processed by hot forging, hot rolling and multi pass cold drawing with intermediate annealing, and the wires with diameter of 2 mm were fabricated. The wires were heat treated by normal heat treatment and cyclic heat treatment respectively, and the microstructure, tensile strength, super-elasticity and hardness of the wires were tested. The results show that with the increase of quenching temperature during normal heat treatment, the grain size increases from 213 μm to 547 μm. The tensile strength and Vickers hardness decrease from 771 MPa and 264 to 618 MPa and 246, respectively, but the super-elasticity of the material is slightly improved with the maximum super-elastic strain of 2.5%. During cyclic heat treatment, the grains grow abnormally with the increase of cycle. The tensile strength and Vickers hardness of the corresponding wire decrease from 348 MPa and 240 to 302 MPa and 226, respectively, and the super-elastic strain increases from 4% to 10%. After 5 cycles, the deformation completely recovers after loading to 10% strain and then unloading, showing excellent super-elasticity.
HTML   查看全文  查看/发表评论  下载PDF阅读器