| 袁志燕,钟建华.电脑散热片换热过程数值模拟分析[J].有色金属材料与工程,2015,36(1):29-33. |
| 电脑散热片换热过程数值模拟分析 |
| The Simulation Analysis of Heat Transfer for Computer Heat Sinks |
| |
| DOI：10.13258/j.cnki.snm.2015.01.007 |
| 中文关键词: 散热片 数值模拟 Ansys 正交试验 |
| 英文关键词:heat sink numerical simulation Ansys orthogonal experiment |
| 基金项目:江西省重大专项计划项目(赣科发计字[2003]23号) |
|
| 摘要点击次数: 1837 |
| 全文下载次数: 1403 |
| 中文摘要: |
| 研究的对象是直板式铝散热片,通过改变散热片的结构参数(齿厚、齿高、齿间距和底板厚度),以Ansys软件为载体,将所作模型图导入Ansys软件中进行模拟,得出测试点温度.基于正交试验分析,得出结果:散热片的齿厚和齿间距对其散热效果影响最大,其次是齿高,底板厚度次之;其他参数不变时,齿厚在0.5～1.5 mm内,随着齿厚的增加,散热效果增强,齿厚超过1.5 mm,散热效果则减弱;齿间距在1～1.5 mm内,随着齿间距的增加,散热效果增强,齿间距超过1.5 mm,散热效果则减弱;随着齿高的增加,散热效果呈现增强趋势;底板厚度在2～3 mm内,随着厚度的增加散热效果增强,当厚度超过3 mm时,散热效果呈下降趋势. |
| 英文摘要: |
| This paper is mainly focused on the simulation of heat transfer for computer heat sinks.First,in the phase of numerical simulation,the models are developed by changing the parameters of the heat sink,including tooth thickness,tooth height,tooth spacing and floor thickness.Then the model are simulated in Ansys software and the testing temperature is obtained.The results show that the tooth thickness and tooth spacing of the heat sink have the greatest impact on the cooling effect.When other parameters remain constant,the cooling effect is enhanced with the increasing of tooth thickness on range of the 0.5 mm to 1.5 mm and the tooth spacing on range of the 1mm to 1.5mm.The cooling effect is weakened out of the range.In addition,with the increase of tooth height,the cooling effect showed a trend of increase.When plate thickness is in 2-3 mm range,the cooling effect is enhanced with the increase of its thickness,and yet with more than 3 mm thickness cooling effect is on the decline. |
| HTML 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
