期刊信息
  • 主管单位:
  • 上海市科学技术协会
  • 主办单位:
  • 上海有色金属学会
    上海理工大学
  • 名誉主编:
  • 陈兴章
  • 主    编:
  • 刘 平
  • 地    址:
  • 上海市军工路516号
  • 邮政编码:
  • 200093
  • 联系电话:
  • (86)021-55781550
  • 电子邮件:
  • nmme@usst.edu.cn
  • 国际标准刊号:
  • 2096-2983
  • 国内统一刊号:
  • 31-2125/TF
  • 单    价:
  • 8.00
  • 定    价:
  • 60.00
郭丰伟,雷君相,高文静.豆形截面钢丝辊模拉拔工艺数值模拟研究[J].有色金属材料与工程,2017,38(4):229-233.
豆形截面钢丝辊模拉拔工艺数值模拟研究
Simulation Research on Roll Die Drawing Process for Bean-shaped Steel Wire
  
DOI:10.13258/j.cnki.nmme.2017.04.008
中文关键词:  豆形截面钢丝  孔型结构  辊模拉拔  有限元模拟  理论指导
英文关键词:bean-shaped cross-section steel wire  groove shape  roll die drawing  3D finite element  theoretical guidance
基金项目:
作者单位E-mail
郭丰伟 上海理工大学 材料科学与工程学院, 上海 200093  
雷君相 上海理工大学 材料科学与工程学院, 上海 200093 junxlei@163.com 
高文静 上海理工大学 材料科学与工程学院, 上海 200093  
摘要点击次数: 13
全文下载次数: 11
中文摘要:
      采用二辊五道次辊模拉拔方法成形豆形截面钢丝.依据豆形截面钢丝形状的特殊性及AISI70号钢材的特性,设计了各道次孔型形状.其中第一、二、四、五道次的道次压缩率相等,辊子采用横辊摆放;第三道次的道次压缩率为0,该道次的辊子采用与横辊呈90°的立辊摆放.计算并设计出各道次辊模组成的孔型型腔的截面尺寸和形状,再利用Deform-3D模拟软件对五道次辊拉拔过程进行仿真模拟,分析了工件辊模拉拔过程的变形机理,并对辊模拉拔过程中工件的等效应力、等效应变、模具的载荷等进行了分析,同时选取特殊点进行应力应变比较.研究结果表明,通过辊模拉拔方法生产的豆形截面钢丝,其成形效果良好.
英文摘要:
      According to the particularity of bean-shaped cross-section steel wire and characteristics of AISI70 steel,groove shapes in five processes are designed and roll die drawing process is adopted in this paper.The compression ratio in the first,second,fourth and fifth process is equal,and the roll dies are horizontal.The third process compression rate is 0 and the roll dies are vertical,whose angle is 90° compared with horizontal roll dies.The sizes of groove cavities and roll dies shapes are designed.A 3D finite element model of roll die drawing process of the bean-shaped steel wire is developed under the Deform-3D platform and the plastic deformation process of the billet is analyzed.Based on this accurate 3D FE model,the forming laws of roll die drawing of bean-shaped steel wire are illustrated,which includes effective stress distribution and evolution,effective stain distribution and evolution and the load of roll dies.Meanwhile,several special points are tracked to present the effective stain histories during the roll die drawing process.The result shows that forming effect of bean shaped steel wire is good through the process of roller die drawing.This paper provides technical support for the practice of bean-shaped cross-section steel wire.
HTML   查看全文  查看/发表评论  下载PDF阅读器
关闭